تسجيل
Thermaltake Commander C31 TG ARGB Mid-Tower Case , Dual 200MM ARGB Fans, Tempered Glass, ATX Chassis
- كود المنتج: CA-1N2-00M1WN-00
الأصناف ذات الصلة
ATX Mid-Tower Chassis
- Two Built-in 200mm 5V ARGB Front Fans
- Excellent Cooling Capability with 2-Way Radiator Mounting up to 360mm
- Built-in ARGB Switch Board for Different Lighting Modes
- Gaming Design, Mesh Front Panel
- Riser GPU Support Bracket
- Built-in Power Cover
- 4mm Tempered Glass Side Panel
- Superior Hardware Support
- Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O Port
- I/O Port Supports Dual USB 3.0
Preinstalled with two 200mm 5V ARGB front fans featuring hydraulic bearing, 9 addressable LEDs and 16.8 million-color illumination to guarantee high airflow and custom system designs to show off your PC design skills.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
The 5V ARGB fans can be controlled using a simple interface built into the I/O panel that cycles through 7 different lighting modes and a range of different color options.
- Wave Mode
- Flow Mode
- RGB Lighting
- Radar Mode
- Breath Mode
- Full Lighted Mode
- Single Color
- Light Off
Long press on RGB button for 3 seconds, fans will blink twice which now are controlled by MB software, and vice versa.
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and ASRock official websites.
Expanded from the gaming spirit of the classic Commander MS-I chassis, the uniquely design full mesh panel optimized airflow. With its modern design and high performance, it is the best choice for both gamers and enthusiasts.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Specially designed for dual GPU placement options, Commander C Series has the support for vertical graphic card layout with dual PCI-E slots design. Integrated riser GPU support bracket not only prevents the graphic card from sagging, but also helps to reduce the weight on the motherboard PCI-E slots.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
The tempered glass side panel of the Commander C31 is built to be more durable and scratch resistant than older acrylic panels.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
The Commander C31 has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to 310mm in length with reservoir, and a power supply with length of up to 200mm.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Optimized for excellent cooling capability with two 200mm 5V ARGB front fans and one 120mm standard rear fan. The case is able to house up to two 200mm, two 140mm or three 120mm front fans, up to two 140mm fans on top to allow users build a complete high-end system.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Dual 3.0 USB ports on top-front panel to grant direct access when needed. As well as an ARGB button for controlling 7 lighting modes of ARGB fans.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Specifications
| Model | Commander C31 TG ARGB |
| Case Type | Middle tower |
| Dimension (H x W x D) |
462 x 233 x 507 mm (18.2 x 9.2 x 20 inch) |
| P/N | CA-1N2-00M1WN-00 |
| Net Weight | 8.01 kg / 17.66 lb |
| Side Panel | 4mm Tempered Glass x1 |
| Color | Exterior & Interior : Black |
| Material | SPCC |
| Cooling System |
Rear (exhaust) : 120 x 120 x 25 mm fan (1000rpm, 16 dBA) Front (intake) : 200 x 200 x 30 mm ARGB fan x2 (800rpm, 29.2 dBA) |
|
Drive Bays -Accessible -Hidden |
- 3 x 3.5“ or 2.5” (HDD Bracket); 2 x 2.5” (HDD Bracket) |
| Expansion Slots | 7+2 |
| Motherboards | 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
| I/O Port | USB 3.0 x 2, HD Audio x 1, RGB Switch x 1 |
| PSU | Standard PS2 PSU (optional) |
| Fan Support |
Front: 3 x 120mm, 2 x 140mm, 2 x 200mm Top: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm |
| Radiator Support |
Front: 1 x 360mm, 1 x 280mm Top: 1 x 240mm, 1 x 280mm Rear: 1 x 120mm |
| Clearance |
CPU cooler height limitation: 180mm PSU length limitation: 200mm VGA length limitation: 310mm(With reservoir) 410mm(Without reservoir) VGA width limitation(Vertically): 45mm VGA height limitation: 110mm RAM height limitation: 35mm (With 140mm radiator series) 50mm (With 120mm radiator series) |
Specifications for Thermaltake Commander C31 TG ARGB Mid-Tower Case , Dual 200MM ARGB Fans, Tempered Glass, ATX Chassis , 4mm Tempered Glass x1 , Exterior & Interior : Black | CA-1N2-00M1WN-00
- Thermaltake
- CA-1N2-00M1WN-00
- 25327
- 26 February, 2019
- 10.00 Kg
ATX Mid-Tower Chassis
- Two Built-in 200mm 5V ARGB Front Fans
- Excellent Cooling Capability with 2-Way Radiator Mounting up to 360mm
- Built-in ARGB Switch Board for Different Lighting Modes
- Gaming Design, Mesh Front Panel
- Riser GPU Support Bracket
- Built-in Power Cover
- 4mm Tempered Glass Side Panel
- Superior Hardware Support
- Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O Port
- I/O Port Supports Dual USB 3.0
Dual Built-in 200mm 5V ARGB Case Fans
Preinstalled with two 200mm 5V ARGB front fans featuring hydraulic bearing, 9 addressable LEDs and 16.8 million-color illumination to guarantee high airflow and custom system designs to show off your PC design skills.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
One Click, Switching The Mode
The 5V ARGB fans can be controlled using a simple interface built into the I/O panel that cycles through 7 different lighting modes and a range of different color options.
- Wave Mode
- Flow Mode
- RGB Lighting
- Radar Mode
- Breath Mode
- Full Lighted Mode
- Single Color
- Light Off
Long press on RGB button for 3 seconds, fans will blink twice which now are controlled by MB software, and vice versa.
Wave Mode – [Mode 1] RGB wave flows across the entire fan. Color mode cannot be changed while on wave mode.
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and ASRock official websites.
Angular, Mesh Front Panel
Expanded from the gaming spirit of the classic Commander MS-I chassis, the uniquely design full mesh panel optimized airflow. With its modern design and high performance, it is the best choice for both gamers and enthusiasts.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Riser GPU Support Bracket
Specially designed for dual GPU placement options, Commander C Series has the support for vertical graphic card layout with dual PCI-E slots design. Integrated riser GPU support bracket not only prevents the graphic card from sagging, but also helps to reduce the weight on the motherboard PCI-E slots.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Built-in PSU Cover
Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Seamless Tempered Glass Panel
The tempered glass side panel of the Commander C31 is built to be more durable and scratch resistant than older acrylic panels.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Superior Hardware Support
The Commander C31 has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to 310mm in length with reservoir, and a power supply with length of up to 200mm.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Excellent Cooling Capability
Optimized for excellent cooling capability with two 200mm 5V ARGB front fans and one 120mm standard rear fan. The case is able to house up to two 200mm, two 140mm or three 120mm front fans, up to two 140mm fans on top to allow users build a complete high-end system.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Handy I/O Ports
Dual 3.0 USB ports on top-front panel to grant direct access when needed. As well as an ARGB button for controlling 7 lighting modes of ARGB fans.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Specifications
| Model | Commander C31 TG ARGB |
| Case Type | Middle tower |
| Dimension (H x W x D) |
462 x 233 x 507 mm (18.2 x 9.2 x 20 inch) |
| P/N | CA-1N2-00M1WN-00 |
| Net Weight | 8.01 kg / 17.66 lb |
| Side Panel | 4mm Tempered Glass x1 |
| Color | Exterior & Interior : Black |
| Material | SPCC |
| Cooling System |
Rear (exhaust) : 120 x 120 x 25 mm fan (1000rpm, 16 dBA) Front (intake) : 200 x 200 x 30 mm ARGB fan x2 (800rpm, 29.2 dBA) |
|
Drive Bays -Accessible -Hidden |
- 3 x 3.5“ or 2.5” (HDD Bracket); 2 x 2.5” (HDD Bracket) |
| Expansion Slots | 7+2 |
| Motherboards | 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
| I/O Port | USB 3.0 x 2, HD Audio x 1, RGB Switch x 1 |
| PSU | Standard PS2 PSU (optional) |
| Fan Support |
Front: 3 x 120mm, 2 x 140mm, 2 x 200mm Top: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm |
| Radiator Support |
Front: 1 x 360mm, 1 x 280mm Top: 1 x 240mm, 1 x 280mm Rear: 1 x 120mm |
| Clearance |
CPU cooler height limitation: 180mm PSU length limitation: 200mm VGA length limitation: 310mm(With reservoir) 410mm(Without reservoir) VGA width limitation(Vertically): 45mm VGA height limitation: 110mm RAM height limitation: 35mm (With 140mm radiator series) 50mm (With 120mm radiator series) |
Specifications for Thermaltake Commander C31 TG ARGB Mid-Tower Case , Dual 200MM ARGB Fans, Tempered Glass, ATX Chassis , 4mm Tempered Glass x1 , Exterior & Interior : Black | CA-1N2-00M1WN-00
General Brand- Thermaltake
- CA-1N2-00M1WN-00
- 25327
- 26 February, 2019
- 10.00 Kg
تستحق خدمة التوصيل التي نقدمها إرضاء العملاء. تتم مراقبة البضائع والتعامل معها بعناية فائقة من قبل متخصصي خدمة العملاء المدربين تدريباً جيداً وفريق التوصيل.
- تسليم أي عملية شراء يتم إجراؤها في غضون يوم العمل التالي. يمكن استخدام خيار الدفع عند الاستلام في أي مكان في المملكة العربية السعودية.
- يتم تسليم منتجاتنا الرقمية / الافتراضية عبر رسائل البريد الإلكتروني على الفور.
لدينا سياسة إرجاع لمدة 14 يومًا ، مما يعني أن لديك 14 يومًا بعد استلام العنصر الخاص بك لطلب الإرجاع.
لكي تكون مؤهلاً للإرجاع ، يجب أن يكون العنصر الخاص بك في نفس الحالة التي استلامها ، غير ملبوس أو غير مستعمل ، مع بطاقات وفي عبوتها الأصلية. ستحتاج أيضًا إلى إيصال أو إثبات الشراء.
لبدء الإرجاع ، يمكنك الاتصال بنا على cs@think24sa.com . إذا تم قبول إرجاعك ، فسوف نرسل لك ملصق شحن مرتجعات ، بالإضافة إلى إرشادات حول كيفية ومكان إرسال الطرد الخاص بك. لن يتم قبول العناصر المرسلة إلينا بدون طلب الإرجاع أولاً.
يمكنك دائمًا الاتصال بنا لأي سؤال متعلق بالإرجاع على cs@think24sa.com
الأضرار والمشكلات استثناءات / عناصر غير قابلة للإرجاع التبادلات عمليات رد الأموال يمكن للعميل تقديم طلب على رقم هاتفنا (+966) 500307755 أو (+966) 501147575  أو من خلال  WhatsApp  أيضًا. "
يرجى فحص طلبك عند الاستلام والاتصال بنا على الفور إذا كان العنصر معيبًا أو تالفًا أو إذا تلقيت العنصر الخطأ ، حتى نتمكن من تقييم المشكلة وإجراء هذا صحيح.
لا يمكن إرجاع أنواع معينة من العناصر ، مثل السلع القابلة للتلف (مثل الطعام أو الزهور أو النباتات) أو المنتجات المخصصة (مثل الطلبات الخاصة أو المخصصة العناصر) ، ومنتجات العناية الشخصية (مثل منتجات التجميل). كما أننا لا نقبل إرجاع المواد الخطرة أو السوائل القابلة للاشتعال أو الغازات. الرجاء الاتصال إذا كانت لديك أسئلة أو مخاوف بشأن العنصر المحدد الخاص بك.
للأسف ، لا يمكننا قبول عمليات إرجاع البطاقات الرقميةÂ أو بطاقات الهدايا. البطاقات الرقمية أو بطاقات الهدايا هي غير قابلة للاستبدال / غير قابلة للاسترداد.
إن أسرع طريقة لضمان حصولك على ما تريد هي إرجاع العنصر الذي لديك ، وبمجرد قبول الإرجاع ، قم بإجراء عملية شراء منفصلة للعنصر الجديد.
سنقوم بإخطارك بمجرد استلامنا وفحصنا لإرجاعك ، وسنخبرك إذا تمت الموافقة على رد الأموال أم لا. في حالة الموافقة ، سيتم استرداد أموالك تلقائيًا باستخدام طريقة الدفع الأصلية. يُرجى تذكر أن الأمر قد يستغرق بعض الوقت حتى يتمكن البنك أو شركة بطاقة الائتمان التي تتعامل معها من معالجة رد الأموال وإرسالها أيضًا.
                Â
لمزيد من الاستفسارات حول طلباتك ، يرجى الاتصال على (+966) 500307755 / (+966) 501147575 أو cs@think24sa.com
